Wood, tiles, metal, glass, plastic, wall, fabric, steel and galvanised steel sheet. For indoor and outdoor use.
Vintage Prestige is a ultra-matt enamel. It is a high-covering product, which strongly adheres to all kinds of surfaces. The special resins in its formulation give the product a thick consistency, ideal for creating textured effects without the need to add chalk. If a smooth finish is desired, it is recommended to dilute the product with 10% water. Vintage Prestige is a washable product. No sanding, no stripping, no primer application required. The application of two coats is recommended. Toy Safety: tested according to standard EN 71.3.
Clean the surface from dirt, dust and grease by means of Clean & Grip VY0500, because these substances could avoid the adhesion of the coating. If old coatings peeled off, sand with 150-180 grit sandpaper. Spread the product on the surface. After 2 hours it is possible to apply a second coat. To decorate rusty metal surfaces, remove the rust with sandpaper or metallic brush. Apply an antirust, then apply Vintage Prestige products. RBxx90 can be diluted up to 10% for brush application and up to 15-20% for spray application.
500 ml