Formulation
Water-based
What it is used for
Coating
Where to use it
Outdoors, Indoors
On which object
Furniture, Fences and enclosures, Frames and skirting boards, Windows and shutters, Gazebos, garden houses and doghouses, Garden furniture, Watercrafts, Indoor floorings, Floorings and poolsides, Doors, Front doors and entry doors, Claddings, Claddings and boiserie, Outdoor beams, Indoor beams
Material
Wood
Final result
Visible wood grain

Safety information

UFI
RX1000 UFI: E3PN-80GH-D00U-047F

Warning. May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects. Contains: reaction mass of α-3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-ω-hydroxypoly(oxyethylene) and α-3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-ω-3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyloxypoly(oxyethylene); 2-methyl-4-isothiazolin-3-one; reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate; 1,2-benzisothiazol-3-(2h)-one; 3-iodo-2-propynyl butylcarbamate. Wear protective gloves. Dispose of contents/container in accordance with regulation in force. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. If skin irritation or rash occurs: Get medical advice/attention. If medical advice is needed, have product container or label at hand. The empty container must be delivered closed, with the original cap, to a recycling center. Check the dispositions of your municipality. EU limit value for this product (cat. A/e): 130 g/l. Maximum VOC content for this product 40 g/l.

Fields of application

Exterior floors, deckings, jetties, pool sides, railings.

Instructions

Raw wood. Sand the support with 150 grit sandpaper, clean the surface from the sanding powder and apply 1-2 coats of product. Stained/impregnated wood. It is possible to apply RX1000 on a wood treated with low-solid content dyes or wood stains. Once the surface has been cleaned, sand with sandpaper or scotch brite. Then remove the powder and apply 1-2 coats of product. Coated wood. Sand with 80-150 grit sandpaper and bring the wood back to the raw condition. Clean the surface and apply 1-2 coats of product.

Overcoating

Exclusive 1 RX50xx, Exclusive 2 RX20xx, Floor Prestige RB2x70.

Packaging

750 ml

Quick info

Storage
5 °C
Drying time between coats
2-3 hours
Mix it well before use
Specific weight
1.01 ± 0.03 g/cm³
8.5 ± 1.0
Ready to use
Yield
12–20 m²/L
Solid content
15 ± 2 %
Overcoating
3-4 hours
Painting
10 °C
Brush
Spray gun
Roller

Available colours

RX1000Transparent